會員登錄
                    請登錄您的生意號,獲取電子名片。便于轉發分享!
                    取消
                    Tianda News
                    會員登錄
                    請登錄您的生意號,獲取電子名片。便于轉發分享!
                    取消
                    Coal burning boiler ZDFR
                    Coal burning boiler ZDFR
                    Product Category:Hot blast stove series
                    Fluidized bed coal-fired hot blast furnace (abbreviated as boiling furnace), its combustion mode is that the coal is broken into particles less than 10mm, through the coal feeder uniform speed into the furnace fluidized bed; The high pressure wind of the blower is shot into the belly of the furnace through the isobaric bellows from the numerous holes of the hood on the air distribution plate, and the scattered wind is aggregated into the "air cushion" to hold up the coal particles and the charge is fluidized boiling combustion. The coal particles and slag jump at high temperature, friction, collision and cracking, from large to small until burned out; This kind of combustion has the characteristics of large contact area between air and fuel, high relative motion speed, long residence time of fuel in the fluidized bed, fast combustion speed, high degree of burnout, energy saving and environmental protection. Therefore, it has been widely used and developed rapidly in industrial kiln.
                    Product Introduction

                    1.Product introduction

                    Fluidized bed coal-fired hot blast furnace (abbreviated as boiling furnace), its combustion mode is that the coal is broken into particles less than 10mm, through the coal feeder uniform speed into the furnace fluidized bed; The high pressure wind of the blower is shot into the belly of the furnace through the isobaric bellows from the numerous holes of the hood on the air distribution plate, and the scattered wind is aggregated into the "air cushion" to hold up the coal particles and the charge is fluidized boiling combustion. The coal particles and slag jump at high temperature, friction, collision and cracking, from large to small until burned out; This kind of combustion has the characteristics of large contact area between air and fuel, high relative motion speed, long residence time of fuel in the fluidized bed, fast combustion speed, high degree of burnout, energy saving and environmental protection. Therefore, it has been widely used and developed rapidly in industrial kiln.

                    2.Fluidized bed uses

                    Boiling furnace can be used for rotary dryer, vertical dryer, hammer dryer, indirect dryer, slag micro powder vertical mill, air sweep coal mill or coal powder vertical mill, fertilizer slurry granulator, powder drying tower, waste heat generation heat, material frying pan machine, all kinds of semi-finished product dryer and other equipment heating; Can be widely used in industrial raw materials or products drying, roasting. Such as: slag, clay, sludge, calcium carbide slag, compound fertilizer, industrial gypsum, gypsum board, iron fine powder, quartz sand, yellow sand, laterite ore, sulfur concentrate, siderite, zinc leaching slag, white carbon black, coke, coal powder and slime, etc.

                    3.Main performance and characteristics

                    1.Wide fuel adaptability, combustible value of more than 6270kJ/kg (1500kcal/kg) of all kinds of bituminous coal, anthracite, and even coal liver stone, chain row furnace slag, oil shale, coal slime, biomass fuel;
                    2.Furnace combustion temperature (850~1100t), uniform operating temperature, stable heating;
                    3.High combustion efficiency, burnout rate can reach more than 99%, furnace thermal efficiency is greater than 94%;
                    4.Easy ignition, long compression time, intermittent compression fire up to 16~48 hours, no need to reignite the furnace;
                    5.The outlet temperature of hot flue gas can be adjusted, the heating load can be adjusted broadly, and the outlet orientation of heating flue gas pipeline is flexible.
                    6.Ash slag carbon content < 1%, not easy to soften or bond, good activity, suitable for use as cement mixing material, easy to comprehensive utilization;
                    7.Clean combustion, low nitrogen oxide content in the flue gas, low cost curing desulfurization can be used in the furnace, so that the sulfur in the coal to solidify into the slag;
                    8.Realize mechanical and electrical integration control, intelligent design of thermal control, low labor intensity;
                    9.Long service life of furnace lining, less wearing parts, low maintenance cost.

                    Product parameter introduction

                    Technical parameters/models

                    Heating capacity kJ/h

                    Coal consumptionkg/h

                    Furnace body dimension length × width × heightmm

                    Furnace body weight t (reference)

                    ZDFR-1

                    1 x4.18x106

                    143

                    4272x3228x4400

                    90

                    ZDFR-2

                    2x4.18x 106

                    286

                    4504x3460x4800

                    110

                    ZDFR-3

                    3x4.18x 106

                    429

                    4968x3924x5000

                    130

                    ZDFR-4

                    4x4.18x 106

                    571

                    5316x4156x5400

                    150

                    ZDFR-5

                    5x4.18x106

                    714

                    5784x4852x5600

                    180

                    ZDFR-6

                    6x4.18x10°

                    857

                    6016x4968x5800

                    200

                    ZDFR-8

                    8x4.18x 106

                    1143

                    6132x5780x6300

                    240

                    ZDFR-10

                    10x4.18x 106

                    1429

                    6480x6244x6800

                    270

                    ZDFR-12

                    12x4.18x106

                    1714

                    7060x6940x7100

                    300

                    ZDFR-14

                    14x4.18x 106

                    2000

                    7408x7404x7400

                    350

                    ZDFR-16

                    16x4.18x 106

                    2286

                    7520x7404x7800

                    400

                    ZDFR-18

                    18x4.18x106

                    2571

                    7980x6940x8600

                    420

                    ZDFR-20

                    20x4.18x10。

                    2857

                    8100x7170x8940

                    450

                    ZDFR-25

                    25x4.18x 106

                    3571

                    8330x7400x9360

                    500

                    ZDFR-30

                    30x4.18x 106

                    4286

                    8930x7656x10020

                    600

                    ZDFR-35

                    35x4.18x10'

                    5000

                    9140x7780x10500

                    750

                    Instructions for ordering


                    Installation precautions


                    Home

                    Home

                    News

                    News

                    About

                    About

                    Products

                    Products

                    Contact

                    Contact

                    国产精品永久无码AV毛片18禁_精品人妻午夜一区二区三区_色欲av人妻无码精品一区久久_亚洲一区二区三